Tags: , ,

Forum Replies

  1. Hi Rene,
    I tried this on WAN interface because my ISP uses DHCP, but didn’t make any difference to client-id.

    interface GigabitEthernet0/1
     ip address dhcp client-id GigabitEthernet0/1
     ip access-group INTERNET in
     ip nat outside
     ip inspect FIREWALL out
     ip virtual-reassembly in
    Aug 13 23:42:47 UTC:    Retry count: 1   Client-ID: cisco-c471.fec5.39d9-Gi0/1
    Aug 13 23:42:47 UTC:    Client-ID hex dump: 636973636F2D633437312E666563352E
    Aug 13 23:42:47 UTC:                        333964392D4769302F31
    Aug 13 23:42:47 UTC:    Hostname: c2901
    Aug 13 23:42:47 UTC: DHC
    ... Continue reading in our forum

  2. Hmm that’s weird. I tried this on a 1841 router. What IOS is your 2900 running?

  3. Hi Rene,
    I am running c2900-universalk9-mz.SPA.154-3.M2.bin.

  4. You could try another IOS, see if it makes a difference. It’s strange though and there is no other command that influences this.

Ask a question or join the discussion by visiting our Community Forum