We're Sorry, Full Content Access is for Members Only...

If you like to keep on reading, Become a Member Now! Here is why:

  • Learn any CCNA, CCNP and CCIE R&S Topic. Explained As Simple As Possible.
  • Try for Just $1. The Best Dollar You've Ever Spent on Your Cisco Career!
  • Full Access to our 651 Lessons. More Lessons Added Every Week!
  • Content created by Rene Molenaar (CCIE #41726)

426 Sign Ups in the last 30 days

satisfaction-guaranteed
100% Satisfaction Guaranteed!
You may cancel your monthly membership at any time.
No Questions Asked!

Tags: ,


Forum Replies

  1. Hello Rene,

    Is the client-identifier configured on the dhcp server is not the mac address of the dhcp client? Is it a different value?(real world)

    I tried to configure the “ip address dhcp client-id fa0/0” on the dhcp client but it’s not getting the correct ip im expecting. I already have a dhcp pool for it on the dhcp server.:

    DHCP SERVER:

    R1#SHOW RUN | sec ip dhcp
    no ip dhcp use vrf connected
    ip dhcp pool DONDRUJA
       network 192.168.1.0 255.255.255.0
       default-router 192.168.1.1
       option 150 ip 192.168.1.1
       dns-server 8.8.8.8
       lease 2
    ip dhcp pool PC2
     
    ... Continue reading in our forum

  2. Hi Rene,

    For the DHCP client in cisco router, there’s option to put the hostname. What the purpose to put the hostname?

    R1(config)#interface fastEthernet 0/0
    R1(config-if)#ip address dhcp client-id fastEthernet 0/0 hostname R1
    

    Davis

  3. Can you configure multiple static bindings in the same pool?

10 more replies! Ask a question or join the discussion by visiting our Community Forum