Prefixes that are advertised by routing protocols like OSPF, EIGRP or RIP can be filtered. One way of doing this is by using a distribute-list. In this lesson I’ll give you an example of how to filter certain prefixes with a distribute-list.
Filtering can occur inbound or outbound. If you have an inbound route filter we will first check if the network is permitted or not before we will accept it. Let’s take a look at a network topology so I can give you a demonstration:
R1 and R2 are connected to each other and running EIGRP. On R2 I have added a couple of loopback interfaces with prefixes that we will advertise in EIGRP. Here is the configuration:
R1(config)#router eigrp 12 R1(config-router)#no auto-summary R1(config-router)#network 192.168.12.0
R2(config)#router eigrp 12 R2(config-router)#no auto-summary R2(config-router)#network 192.168.12.0 R2(config-router)#network 172.16.0.0 0.0.3.255
Above you can see that we advertise all prefixes in EIGRP.
R1#show ip route eigrp 172.16.0.0/24 is subnetted, 4 subnets D 172.16.0.0 [90/156160] via 192.168.12.2, 00:01:07, FastEthernet0/0 D 172.16.1.0 [90/156160] via 192.168.12.2, 00:01:07, FastEthernet0/0 D 172.16.2.0 [90/156160] via 192.168.12.2, 00:01:07, FastEthernet0/0 D 172.16.3.0 [90/156160] via 192.168.12.2, 00:01:07, FastEthernet0/0
If we look at the routing table of router R1 we can see all those networks on the loopback interfaces as it should be. Now we’ll see if we can do some filtering.
R1(config)#router eigrp 12 R1(config-router)#distribute-list ? <1-199> IP access list number <1300-2699> IP expanded access list number WORD Access-list name gateway Filtering incoming updates based on gateway prefix Filter prefixes in routing updates route-map Filter prefixes based on the route-map
Go to the configuration of the EIGRP process and use the distribute-list command to see your options. As you can see we can choose between an access-list, a prefix-list or a route-map. Let’s start with the access-list. You are probably familiar with the concept of access-lists if you studied CCNA.
R1(config-router)#distribute-list 1 ? in Filter incoming routing updates out Filter outgoing routing updates
If you specify an access-list number you can choose if this route filter has to be inbound or outbound.
R1(config-router)#distribute-list 1 in ? Async Async interface BVI Bridge-Group Virtual Interface CDMA-Ix CDMA Ix interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Lex Lex interface Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Null Null interface Port-channel Ethernet Channel of interfaces Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-PPP Virtual PPP interface Virtual-Template Virtual Template interface Virtual-TokenRing Virtual TokenRing <cr>
If you want you can choose the interface where to apply the inbound route filter to. If you don’t specify an interface it will apply to all interfaces.