Cisco ASA Static NAT Configuration

In previous lessons I explained how you can use dynamic NAT or PAT so that your hosts or servers on the inside of your network are able to access the outside world. This is great but it’s only for outbound traffic or in “ASA terminology”…traffic from a higher security level going to a lower security level.

What if an outside host on the Internet wants to reach a server on our inside or DMZ? This is impossible with only dynamic NAT or PAT. When we want to achieve this we have to do two things:

  • Configure static NAT so that the internal server is reachable through an outside public IP address.
  • Configure an access-list so that the traffic is allowed.

To demonstrate static NAT I will use the following topology:

ASA1 Outside DMZ R1 R2Above we have our ASA firewall with two interfaces; one for the DMZ and another one for the outside world. Imagine that R1 is a webserver on the DMZ while R2 is some host on the Internet that wants to reach our webserver. Let’s configure our firewall so that this is possible…

Static NAT Configuration

First we will create a network object that defines our “webserver” in the DMZ and also configure to what IP address it should be translated. This configuration is for ASA version 8.3 and later:

ASA1(config)# object network WEB_SERVER
ASA1(config-network-object)# host 192.168.1.1
ASA1(config-network-object)# nat (DMZ,OUTSIDE) static 192.168.2.200

The configuration above tells the ASA that whenever an outside device connects to IP address 192.168.2.200 that it should be translated to IP address 192.168.1.1. This takes care of NAT but we still have to create an access-list or traffic will be dropped:

ASA1(config)# access-list OUTSIDE_TO_DMZ extended permit tcp any host 192.168.1.1

The access-list above allows any source IP address to connect to IP address 192.168.1.1. When using ASA version 8.3 or later you need to specify the “real” IP address, not the “NAT translated” address. Let’s activate this access-list:

ASA1(config)# access-group OUTSIDE_TO_DMZ in interface OUTSIDE

This enables the access-list on the outside interface. Let’s telnet from R2 to R1 on TCP port 80 to see if it works:

R2#telnet 192.168.2.200
Trying 192.168.2.200 ... Open

Great, we are able to connect from R2 to R1, let’s take a look at the ASA to verify some things:

ASA1# show xlate
1 in use, 1 most used
Flags: D - DNS, e - extended, I - identity, i - dynamic, r - portmap,
       s - static, T - twice, N - net-to-net
NAT from DMZ:192.168.1.1 to OUTSIDE:192.168.2.200
    flags s idle 0:08:44 timeout 0:00:00
ASA1# show access-list
access-list cached ACL log flows: total 0, denied 0 (deny-flow-max 4096)
            alert-interval 300
access-list OUTSIDE_TO_DMZ; 1 elements; name hash: 0xe96c1ef3
access-list OUTSIDE_TO_DMZ line 1 extended permit tcp any host 192.168.1.1 eq www (hitcnt=6) 0x408b914e

Above you can see the static NAT entry and also the hit on the access-list. Everything is working as it is supposed to be.

Static NAT for entire subnet

The previous example was fine if you have only a few servers since you can create a couple of static NAT translations and be done with it. There is another option though, it’s also possible to translate an entire subnet to an entire pool of IP addresses. Let me give you an example of what I’m talking about:

ASA1-R1-R3-dmz-R2-outsideThe topology above is the exact same as the previous example but I have added R3 to the DMZ. Now imagine that our ISP gave us a pool of IP addresses, let’s say 10.10.10.0 /24. We can use this pool to translate all the servers in the DMZ, let me show you how:

We're Sorry, Full Content Access is for Members Only...

If you like to keep on reading, Become a Member Now! Here is why:

  • Learn any CCNA, CCNP and CCIE R&S Topic. Explained As Simple As Possible.
  • Try for Just $1. The Best Dollar You’ve Ever Spent on Your Cisco Career!
  • Full Access to our 740 Lessons. More Lessons Added Every Week!
  • Content created by Rene Molenaar (CCIE #41726)

546 Sign Ups in the last 30 days

satisfaction-guaranteed
100% Satisfaction Guaranteed!
You may cancel your monthly membership at any time.
No Questions Asked!

Tags: ,


Forum Replies

  1. Hi Rene ,

    Could you explain twice nat and use cases also ?

    Thank you

  2. Hi Sims,

    I will, added it to the list.

    Rene

  3. Hi Rene,

    Need help again, So its NAT this time.

    ASA1(config)# object network WEB_SERVER
    ASA1(config-network-object)# host 192.168.1.1
    ASA1(config-network-object)# nat (DMZ,OUTSIDE) static 192.168.2.200
    

    Let’s call this statement A.

    The configuration above tells the ASA that whenever an outside device connects to IP address 192.168.2.200
    that it should be translated to IP address 192.168.1.1.

    ASA1(config)# object network DMZ
    ASA1(config-network-object)# subnet 192.168.1.0 255.255.255.0
    ASA1(config-network-object)# nat (DMZ,OUTSIDE) static PUBLIC_POOL
    

    Let’s call

    ... Continue reading in our forum

  4. Hi Asi,

    The first statement tells the ASA that a device with IP address 192.168.1.1 on the DMZ has to be translated to 192.168.2.200 which is on the outside. On the interfaces we configured to which security-zone it belongs (INSIDE, DMZ or OUTSIDE).

    The direction doesn’t matter…from the outside you can connect to 192.168.2.200 and it will be translated to 192.168.1.1. When 192.168.1.1 initiates traffic that goes from DMZ > outside then it also gets translated to 192.168.2.200. The only thing the ASA cares about is what to translate.

    The same thing applies to th

    ... Continue reading in our forum

  5. hi Rene Thanks for the reply
    i got most of it ,Actually my confusion started by reading the following configuration from cisco. For last if you can explain short and simple on waht is REAL_ifc and MAPPED_ifc from the below example this will make it crystal clear

    Thanks in Advance
    nat (real_ifc,mapped_ifc) dynamic mapped_obj [interface] [dns]

    Example:
    hostname (config-network-object)# nat (inside,outside) dynamic MAPPED_IPS interface
    Configures dynamic NAT for the object IP addresses. See the following guidelines:

    ***Interfaces —If you do not specify the real

    ... Continue reading in our forum

46 more replies! Ask a question or join the discussion by visiting our Community Forum