Tags:


Forum Replies

  1. Hello,

    please help me with IPv6 default route.

    for example:

    Futura(config)#ipv6 route ::/0 fastEthernet 0/0 FE80::CE0A:22FF:FED5:0

    so ::/0 means, any address, where must match 0 bytes.

    Is my example of default route correct?

    Thank you

  2. Hello Rene,

    Thanks alot for your amazing way to explain this.
    I have a question, how did you get the address FE80::CE0A:22FF:FED5:0
    is it any address start with FE80 (link local) or what? I did not get it.
    Thanks in advance
    Wisam

  3. Ok first question. In you post you have the following below. YOu will notice its pointing to :2:2 however there is no :2:2 network on any of the routers is this a typo did you mean to say :23:23::??? also its a 64 instead of a 128 which is what the loopback is. However maybe all addresses are held within the 128?? So your just pointing to a non-existent address knowing that since the one is a prefix of 128 that can hold all addresses so its being sent that way. very cryptic though and I wanted to confirm.

    if this is just a typo then you might want to

    ... Continue reading in our forum

  4. Hello Brian

    It seems that @ReneMolenaar is using the 2001:2:2::/64 prefix for the L0 interface on R2 in the first diagram, but when he adds R3 to the topology, he changes it to 2001:23:23::/64. I’ll let him know to change it so that it is consistent all the way through the lesson, either 2:2 or 23:23, including the routing tables.

    ... Continue reading in our forum

24 more replies! Ask a question or join the discussion by visiting our Community Forum