CCNP ROUTE
Course Description
CCNP ROUTE is one of the three CCNP routing & switching exams. You will learn more about routing protocols like OSPF and EIGRP and how routing on the Internet works with BGP (Border Gateway Protocol). You will also learn about advanced routing techniques like redistribution and filtering.
Course Highlights
In this course you will learn:
- More about routing protocols like OSPF and EIGRP.
- How BGP (Border Gateway Protocol) is used for routing on the Internet between autonomous systems.
- How to configure import / export routes between different routing protocols thanks to redistribution.
- How to connect remote branch offices to the network with different tunneling techniques.
- How to secure your routers.
- And many other topics…
Presented to you by instructor Rene Molenaar, CCIE #41726
Requirements
Good understanding of all routing topics in CCNA R&S
Lessons
- Introduction to TCP and UDP
- ARP (Address Resolution Protocol) explained
- Static route on Cisco IOS Router
- Introduction to OSPF
- OSPF DR/BDR Election explained
- Introduction to EIGRP
- EIGRP Unequal Cost Load Balancing
- Basic EIGRP Configuration
- How to configure EIGRP Summarization
- Standard access-list example on Cisco Router
- Extended Access-List example on Cisco Router
- Introduction to NAT and PAT
- Static NAT on Cisco IOS
- Cisco IOS Dynamic NAT Configuration
- How to configure PAT on Cisco IOS Router
- Introduction to IPv6
- Stateless autoconfiguration for IPv6
- IPv6 Neighbor Discovery Protocol
- How to configure IPv6 Static Route
- How to configure RIPNG on Cisco IOS Router
- IPv6 EIGRP on Cisco IOS Router
- IPv6 OSPFv3 on Cisco IOS Router
- Introduction to PPP on Cisco IOS Router
- Introduction to Frame-Relay for CCNA Students
- How to configure Frame-Relay Point-to-Multipoint
- How to configure Frame-Relay Point-to-Point
- Introduction to CDP (Cisco Discovery Protocol)
- EIGRP Packets explained
- Detailed look at EIGRP Neighbor Adjacency
- EIGRP Neighbor and Topology Table
- How to configure EIGRP Authentication
- EIGRP Queries and Stuck in Active
- OSPF LSAs and LSDB flooding Tutorial
- OSPF Packets and Neighbor Discovery
- OSPF Non-Broadcast Network Type over Frame-Relay
- OSPF Broadcast Network Type over Frame-Relay
- OSPF Point-to-Multipoint over Frame-Relay
- OSPF Point-to-Multipoint Non-Broadcast Network Type over Frame-Relay
- OSPF Point-to-Point Network Type over Frame-Relay
- OSPF Next Hop IP with different Network Types
- How to configure OSPF Summarization
- How to configure OSPF Default Route
- Introduction to OSPF Stub Areas
- How to configure OSPF Stub Area
- How to configure OSPF Totally Stub Area
- OSPF NSSA (Not So Stubby) Area
- How to configure OSPF Totally NSSA Area
- OSPF Plain Text Authentication
- How to Configure OSPF MD5 Authentication
- How to configure OSPF Virtual Link
- How to Filter Prefixes with Distribute-list
- How to configure Prefix-List on Cisco Router
- How to configure Policy Based Routing
- Introduction to Redistribution
- Redistribution between OSPF and RIP
- Redistribution between EIGRP and RIP
- How to configure Administrative Distance
- How to configure Route Tagging
- How to configure EBGP (External BGP)
- How to Configure BGP Weight Attribute
- BGP Local Preference Attribute
- How to configure BGP AS Path Prepending
- BGP Origin Code Attribute explained
- How to configure BGP MED Attribute
- IPv6 Redistribution between RIPNG and OSPFv3
- IPv6 tunneling over IPv4 Configuration
- IPv6 Automatic 6to4 Tunneling
- OSPF Path Selection explained
- How to configure DHCP Server on Cisco IOS
- GRE Tunnel on Cisco IOS Router
- GRE Tunnel Recursive Routing Error
- Encrypted GRE Tunnel with IPSEC
- Reliable Static Routing with IP SLA
- BGP Regular Expressions Examples
- BGP Prevent Transit AS
- Unicast Reverse Path Forwarding (uRPF)
- How to configure SNMPv3 on Cisco IOS Router
- EIGRP Variance Command Example
- OSPF ABR Type 3 LSA Filtering on Cisco IOS
- How to Prepare for Cisco CCNP R&S
- EIGRP Hold Time and Hello Packets
- Cisco PPPoE Server Configuration Example
- MTU Troubleshooting on Cisco IOS
- Cisco Network Time Protocol (NTP)
- Cisco Offset-List Command
- Introduction to IP (Internet Protocol) Version 4
- Cisco DHCPv6 Server Configuration
- EIGRP K Values Formula
- EIGRP Stub Explained
- Cisco IOS DHCP Relay Agent
- OSPF LSA Types Explained
- Internal BGP (Border Gateway Protocol) explained
- BGP Soft Reconfiguration
- BGP AS Path Filter Example
- BGP Route Refresh Capability
- CEF (Cisco Express Forwarding)
- AAA and 802.1X Authentication
- Cisco EVN (Easy Virtual Network)
- VRF Lite Configuration on Cisco IOS
- EIGRP Named Mode Configuration
- BGP Neighbor Adjacency States
- Link Layer Discovery Protocol (LLDP)
- Troubleshooting Metric Redistribution
- Troubleshooting AD Redistribution
- OSPFv3 for IPv4 Configuration
- Shortening IPv6 Addresses
- How to find IPv6 Prefix
- IPv6 EUI-64 explained
- Multiprotocol BGP (MP-BGP) Configuration
- Cisco IOS Syslog Messages
- How to configure SNMPv2 on Cisco IOS Router
- IPv6 Summarization Example
- Introduction to BGP
- EBGP Multihop
- IPv6 Solicited Node Multicast Address
- BGP Private and Public AS Range
- BGP Messages
- How to Read the BGP Table
- How to advertise networks in BGP
- BGP Auto-Summary
- BGP Peer Groups on Cisco IOS
- BGP IPv6 Route Filtering on Cisco IOS
- EIGRP Passive Interface
- EIGRP Static Neighbor
- EIGRP K Values Configuration
- EIGRP Router ID
- BGP Next Hop Self
- EIGRP Default Network Route
- EIGRP Auto-Summary
- EIGRP Route-Map Filtering
- EIGRP IP Bandwidth-Percent
- EIGRP over Frame-Relay
- OSPF Passive Interface
- OSPF Hello and Dead Interval
- OSPF Router ID
- OSPF Reference Bandwidth
- OSPF Distribute-List Filtering
- OSPF LSA Type 5 Filtering on Cisco IOS
- IPv6 Address Types
- IPv6 Address Assignment Example
- IPv6 Access-list on Cisco IOS
- OSPFv3 Authentication and Encryption
- IP SLA (Service-Level Agreement) on Cisco IOS
- DHCP Client on Cisco IOS
- Reliable PBR with IP SLA
- Router Security Policy
- Cisco IOS Time Based Access-List
- Infrastructure Access-List
- IPv4 Packet Header
- Unicast Flooding due to Asymmetric Routing
- ICMP (Internet Control Message Protocol)
- TCP Header
- TCP Window Size Scaling
- Introduction to SNMP
- Introduction to Cisco NetFlow
- Bandwidth Delay Product
- IPsec (Internet Protocol Security)
- Introduction to MPLS
- MPLS Labels and Devices
- MPLS LDP (Label Distribution Protocol)
- MPLS Layer 3 VPN Explained
- Cisco NAT64 Static Configuration
- Introduction to DMVPN
- IPv6 OSPFv3 Default Route
- OSPF Virtual Link Authentication
- BGP Attributes and Path Selection
- Introduction to Route-maps