The raspberry Pi is a great little Linux (Debian) box that has become very popular. It’s cheap (about $25) and since it’s running Linux it can be used for many different applications. I’m using one as a Cisco Console / Terminal server so I don’t have to connect Cisco devices directly to my laptop anymore. The Raspberry Pi has been configured so that I can access a Cisco console port from the wired or wireless network. Here’s what it looks like:
So what does it do?
- The konig USB to Serial RS-232 cable lets me connect to 4 Cisco devices simultaneously.
- Access to these Cisco devices from the wired network.
- Access to these Cisco devices for wireless users through the little D-Link Wireless USB adapter that is configured as access point.
In this tutorial I will show you how to configure your Raspberry Pi as a Cisco console server. We’ll start by installing the latest version of raspbian…
Start by downloading the latest version of raspbian so that we can install it on a SD card. I will use a Linux computer to extract this image to the SD card of the Raspberry Pi. Insert the SD card in your computer and check which driveletter it has:
# df -lh Filesystem Size Used Avail Use% Mounted on /dev/sda5 135G 101G 28G 79% / udev 1.9G 4.0K 1.9G 1% /dev tmpfs 769M 1.1M 768M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.9G 76K 1.9G 1% /run/shm /dev/sdc1 30G 6.5G 22G 24% /media/f0dd0487-5e6d-478f-a2ad-db7f9eb3c0c0 /dev/sdb1 125M 97M 29M 78% /media/System
Above you can see a number of drives that has been mounted. It’s probably /dev/sdb1 since sda5 and sdc1 are too large. Let’s make sure by looking at fdisk:
# sudo fdisk -l [sudo] password for renemolenaar: Disk /dev/sda: 256.1 GB, 256060514304 bytes 255 heads, 63 sectors/track, 31130 cylinders, total 500118192 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004b282 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 204802047 102297600 7 HPFS/NTFS/exFAT /dev/sda3 204804094 500117503 147656705 5 Extended /dev/sda5 204804096 491962367 143579136 83 Linux /dev/sda6 491964416 500117503 4076544 82 Linux swap / Solaris Disk /dev/sdb: 8068 MB, 8068792320 bytes 249 heads, 62 sectors/track, 1020 cylinders, total 15759360 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003ccba Device Boot Start End Blocks Id System /dev/sdb1 * 2048 258047 128000 c W95 FAT32 (LBA) /dev/sdb2 258048 15726591 7734272 83 Linux
/dev/sdb is the drive I am looking for, it’s my 8 GB SD card. Let’s unmount /dev/sdb1 so that we can extract raspbian to this SD card:
# umount /dev/sdb1
Now we can extract the image to the SD card:
# dd bs=4M if=2013-05-25-wheezy-raspbian.img of=/dev/sdb
This will take some time and you won’t see the progress. Grab some coffee and once it’s done you can remove the SD card from your computer and insert it into your Raspberry Pi.
By default SSH will be enabled on your Raspberry Pi so you will be able to login through the network if you don’t have a display connected to it. The default username is ‘pi’ and the password is ‘raspberry’:
# ssh firstname.lastname@example.org email@example.com's password:
I don’t like the default hostname of the Pi so I will first give it another name, let’s call it “CONSOLE”. We’ll have to edit the hostname for this:
$ sudo vi /etc/hostname
You will see the new hostname once you have rebooted your Pi, don’t worry about it for now.
Ser2net lets you access serial ports through TCP which turns your Pi into a console server. It’s in the repositories but don’t install it using “apt-get” because it’s not the latest version. We’ll download and compile ser2net ourselves:
$ wget http://downloads.sourceforge.net/project/ser2net/ser2net/ser2net-2.8.tar.gz
And extract it:
$ tar -xzvf ser2net-2.8.tar.gz
And install it:
$ cd ser2net-2.8/ $ ./configure $ make $ sudo make install
This will take some time since the Raspberry Pi is not a speed champion. Once ser2net is installed we’ll remove the leftovers:
$ make clean
Before we configure ser2net we need to know which port your usb to serial cable is using. Use the following command:
$ dmesg | grep tty [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xe bcm2708.serial=0x91681e36 smsc95xx.macaddr=B8:27:EB:68:1E:36 sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait [ 0.000000] console [tty1] enabled [ 0.584282] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3 [ 0.908119] console [ttyAMA0] enabled [ 537.324931] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
You can see mine is connected to ttyUSB0. Now we can configure ser2net:
$ sudo vi /etc/ser2net.conf
And add the following two lines:
BANNER:banner:NETWORKLESSONS.COM Terminal Server TCP port p device d rn 4001:telnet:0:/dev/ttyUSB0:9600 8DATABITS NONE 1STOPBIT banner
The first line will display a banner to all users who connect, you don’t really need this but it’s a nice extra. The second line is more important, it tells ser2net to listen on TCP port 4001 and to use the /dev/ttyUSB0 device. The baud rate of 9600, 8 databits, no parity and 1 stopbit is what Cisco console ports require by default.
Let’s do a quick test to see if we can connect to this port, we’ll have to start ser2net:
$ ser2net -n
Now try to telnet to TCP port 4001 from another computer:
# telnet 10.56.100.3 4001 Trying 10.56.100.3... Connected to 10.56.100.3. Escape character is '^]'. Welcome to NETWORKLESSONS.COM Terminal Server TCP port 4001 device /dev/ttyUSB0
We are now connected to the serial port…great! As you can see it displays the TCP port that we are connected to and the USB device. Let’s make sure that whenever you reboot the Pi that ser2net is started:
$ sudo vi /etc/rc.local
At the bottom of this file you will find ‘exit 0’. Just above this line you need to add the following line:
The next time you reboot your Pi it will start ser2net automatically for you. You are now ready to use your new Cisco console server but I have some extras for you.
Ser2net supports logging and will write all input and output of a session to a file. For me this is very useful since I can save the output of certain show commands and use them to write lessons later.
Configure ser2net logging
Before we enable logging you should verify that your Pi has its clock configured correctly. ser2net will add a timestamp to its log files and logging is pretty much useless if you don’t have the correct date or time.
By default it will synchronize its time by using NTP but the timezone might be incorrect. Changing the timezone is easy to do:
$ sudo cp /usr/share/zoneinfo/Europe/Amsterdam /etc/localtime
This will change the timezone to CEST (Central European Time) for me. Let’s verify it:
$ date Fri Jul 19 11:55:27 CEST 2013
That’s looking good to me. Now we’ll create a folder that will hold our log files. I will save everything in the /var/log/ser2net folder:
$ sudo mkdir /var/log/ser2net
Now you need to edit the /etc/ser2net.conf file again and add the following:
TRACEFILE:tr1:/var/log/ser2net/tr-p-Y-M-D-H:i:s.U 4001:telnet:0:/dev/ttyUSB0:9600 8DATABITS NONE 1STOPBIT banner tr=tr1 timestamp
The ‘TRACEFILE’ line is new and at the end of the 4001:telnet… line we will add “tr=tr1 timestamp”. This will enable logging for this port and add timestamps to the log files.
You will have to restart ser2net before logging is active. The next time you connect you will see the log files in the /var/log/ser2net folder:
$ ls /var/log/ser2net tr-4001-2013-Jul-19-09:18:26.893894
You now have a console server that saves logging information. In the next part I’ll show you how to enable wireless support and how to secure your Pi:
Wireless Access Point
Most wireless adapters also support access point mode. This is very useful since we can make our Pi broadcast a SSID and let wireless clients connect to it. This turns our Pi into a wireless console server…nice!
Plug in your wireless USB adapter and see if it’s recognized:
$ lsusb Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. Bus 001 Device 004: ID 0bda:8179 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Keep in mind that the USB port of the Raspberry Pi has limited power and not all wireless adapters are supported. Take a look at the elinux Rpi page to see which adapters are supported.
If your USB device is recognized we still have to check if our wireless drivers are operational:
$ iwconfig wlan0 unassociated Nickname:"<WIFI@REALTEK>" Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated Sensitivity:0/0 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
If iwconfig doesn’t give you any information you probably have an issue with drivers.
Once your wireless card is up and running we will install hostapd. This configures the wireless adapter as an access point:
$ sudo apt-get install hostapd
We’ll configure the wireless adapter to use a static IP address instead of DHCP:
$ sudo vi /etc/network/interfaces
Remove the following two lines from this file:
iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
And replace them with the following lines:
iface wlan0 inet static address 172.16.82.254 netmask 255.255.255.0
Our wlan0 interface will use static IP address 172.16.82.254 /24. Now we’ll configure hostapd to set some parameters for the access point:
$ sudo vi /etc/hostapd/hostapd.conf
ssid=Console wpa_passphrase=mysecurepassphrase wpa=3
You can leave most of the settings in this file alone but I will change the SSID and the WPA passphrase. The passphrase will be “mysecurepassphrase” and wpa=3 means we will support WPA and WPA2. Let’s start hostapd:
$ sudo service hostapd start
To make sure hostapd runs after rebooting the Pi we’ll add it to the startup list:
$ sudo update-rc.d hostapd enable
Your Raspberry Pi should now be broadcasting SSID “Console” but wireless clients will have to configure a static IP address. We’ll fix this by installing a DHCP server:
$ sudo apt-get install dnsmasq
At the bottom of this file you should add the following two lines:
This ensures that the DHCP server only runs for wireless clients and that we’ll use 172.16.82.10 – 172.16.82.100 for DHCP clients.
Restart the DHCP server:
$ sudo service dnsmasq restart [ ok ] Restarting DNS forwarder and DHCP server: dnsmasq.
And make sure it boots at startup:
$ sudo update-rc.d dnsmasq enable
Your Raspberry Pi is now configured as an access point. Wireless clients are now able to connect to it and access the console port by telnetting to 172.16.82.254:4001.
In the final part of this tutorial we’ll take a look at some security measures. Your Pi is using a default username / password and the firewall is allowing all traffic.
Even though the Pi is a little box, it’s still a fully functional Linux server. It’s best to take some security measures to protect it. I’m going to change the default username, tighten SSH security a bit and add some rules to the IPTables firewall.
First i’ll replace the default user ‘pi’ with my own username:
$ sudo adduser renemolenaar Adding user `renemolenaar' ... Adding new group `renemolenaar' (1002) ... Adding new user `renemolenaar' (1001) with group `renemolenaar' ... Creating home directory `/home/renemolenaar' ... Copying files from `/etc/skel' ...
Don’t forget to add a password:
$ sudo passwd renemolenaar Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully
And we need to add the new user to the sudoers list or you can’t run any important commands:
$ sudo vi /etc/sudoers
Change the following line:
pi ALL=(ALL) NOPASSWD: ALL
renemolenaar ALL=(ALL) NOPASSWD: ALL
Now try if you are able to log into the Pi using your new username and if you can use sudo. When it’s working we’ll delete the old ‘pi’ account:
$ sudo deluser pi Removing user `pi' ... Warning: group `pi' has no more members. Done.
I always like to change the default SSH port and ensure that the root user can’t login through SSH directly:
$ sudo vi /etc/ssh/sshd_config
Now change the following line:
And change the port number to something else:
Don’t forget to restart SSH to apply the changes you made:
$ sudo service ssh restart
This makes SSH a little bit more secure.
Your Raspberry Pi has the IPtables firewall installed on it by default but we’ll have to add some rules ourselves. I want to make sure outside LAN users can only connect to TCP 4001 for the console port and TCP port 10050 to access SSH. The same rules will apply to wireless users with the exception that they also will request an IP address through DHCP.
Create a new file for IPTables:
$ sudo vi /etc/iptables-rules
And add the following lines to it:
*filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT # LAN Rules -A INPUT -i eth0 -p tcp -m tcp --dport 4001 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 10050 -j ACCEPT # WIRELESS Rules
-A INPUT -i wlan0 -p udp -m udp --dport 67 -j ACCEPT -A INPUT -i wlan0 -p tcp -m tcp --dport 4001 -j ACCEPT -A INPUT -i wlan0 -p tcp -m tcp --dport 10050 -j ACCEPT# Allow ICMP packets necessary for MTU path discovery -A INPUT -p icmp --icmp-type fragmentation-needed -j ACCEPT # Allow echo request -A INPUT -p icmp --icmp-type 8 -j ACCEPT -A INPUT -j DROP COMMIT
Save your file and load the firewall rules:
$ sudo iptables-restore < /etc/iptables-rules
Let’s make sure these rules are loaded when the Pi reboots:
$ sudo vi /etc/network/interfaces
Add the following line at the bottom of the interfaces file:
pre-up /sbin/iptables-restore < /etc/iptables-rules
This is a good moment to reboot your Pi and verify that iptables is running:
$ sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:4001 ACCEPT tcp -- anywhere anywhere tcp dpt:10050 ACCEPT tcp -- anywhere anywhere tcp dpt:4001 ACCEPT tcp -- anywhere anywhere tcp dpt:10050 ACCEPT udp -- anywhere anywhere udp dpt:bootps ACCEPT icmp -- anywhere anywhere icmp fragmentation-needed ACCEPT icmp -- anywhere anywhere icmp echo-request DROP all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination
Your Raspberry Pi is now protected by IPTables.
I hope this tutorial has been useful to you to transform your Little Pi into an awesome wired / wireless Console server. If you enjoy this setup as much as I do, let me know by leaving a comment!