Cisco Easy VPN is a convenient method to allow remote users to connect to your network using IPsec VPN tunnels. The advantage of Easy VPN is that you don’t have to worry about all the IPSEC security details on the client side. Just configure the remote router, group name, username /password and you are ready to go. In this lesson I’ll show you how to configure Easy VPN on a Cisco IOS router and we’ll use the Cisco VPN client to setup the connection.
This is the topology that we’ll be using:
A single router configured for Easy VPN and a computer running Cisco’s VPN client software. Let’s start with the router configuration!
First we need to enable AAA for authentication, authorization and accounting. We can use this for local authentication (usernames and passwords on the router) or use an external RADIUS server for this.
For simplicity, we’ll use local authentication.
VPN(config)#aaa authentication login default local VPN(config)#aaa authentication login VPNUSER local VPN(config)#aaa authorization exec default local VPN(config)#aaa authorization network VPNGROUP local
The username will be “VPNUSER” and we will use a group called “VPNGROUP”. Let’s configure a password for this user:
VPN(config)#username VPNUSER password CISCO
Our next move is to configure the IKE policy. This is where you set parameters that are used at the IKE negotiation.
VPN(config)#crypto isakmp policy 1 VPN(config-isakmp)#authentication pre-share VPN(config-isakmp)#encryption aes VPN(config-isakmp)#group 2
We’ll use AES encryption and diffie hellman group 2. To keep it simple we’ll use a pre-shared key.
For the VPN group we’ll have to configure a number of items. First of all there’s a password but you can also specify some client specific parameters like a DNS server, WINS server, how many users are able to connect etc. Here’s how to do it:
VPN(config)#crypto isakmp client configuration group VPNGROUP VPN(config-isakmp-group)#key 0 CISCO VPN(config-isakmp-group)#dns 192.168.1.253 VPN(config-isakmp-group)#wins 192.168.1.253 VPN(config-isakmp-group)#pool VPNPOOL VPN(config-isakmp-group)#max-users 10 VPN(config-isakmp-group)#netmask 255.255.255.0 VPN(config-isakmp-group)#domain NETWORKLESSONS.LOCAL
The VPN group will use “CISCO” as the password and IP address 192.168.1.253 for the DNS and WINS server. The pool name is called VPNPOOL and this is where we’ll specify the IP addresses for our VPN users:
VPN(config)#ip local pool VPNPOOL 192.168.2.100 192.168.2.200
I’m using subnet 192.168.2.100 for the VPN users. This is a different subnet as our LAN (192.168.1.0 /24).
The next step is to configure a transform-set. This is where we configure our phase 2 authentication and encryption settings:
VPN(config)#crypto ipsec transform-set TRANSFORMSET esp-aes esp-sha-hmac
The transform-set is called “TRANSFORMSET” and we will use AES encryption and SHA for data origin authentication and integrity protection. Now we’ll configure an ISAKMP profile for our VPN group:
VPN(config)#crypto isakmp profile ISAKMPPROFILE VPN(conf-isa-prof)#match identity group VPNGROUP VPN(conf-isa-prof)#client authentication list VPNUSER VPN(conf-isa-prof)#isakmp authorization list VPNGROUP VPN(conf-isa-prof)#client configuration address respond VPN(conf-isa-prof)#virtual-template 1
And create a VPN profile that refers to the transform-set and ISAKMP profile that we just created:
VPN(config)#crypto ipsec profile VPNPROFILE VPN(ipsec-profile)#set transform-set TRANSFORMSET VPN(ipsec-profile)#set isakmp-profile ISAKMPPROFILE
Last but not least we’ll attach the configuration that we did to a virtual interface which receives the connections from the VPN clients. Instead of configuring an IP address on this interface we’ll tell it to use the IP address of the FastEthernet 0/1 (LAN) interface: