We're Sorry, Full Content Access is for Members Only...

If you like to keep on reading, Become a Member Now! Here is Why:

  • Learn any CCNA, CCNP and CCIE R&S Topic. Explained As Simple As Possible.
  • Try for Just $1. The Best Dollar You've Ever Spent on Your Cisco Career!
  • Full Access to our 581 Lessons. More Lessons Added Every Week!
  • Content created by Rene Molenaar (CCIE #41726)

 

295 New Members signed up the last 30 days!

satisfaction-guaranteed

100% Satisfaction Guaranteed!
You may cancel your monthly membership at any time.
No Questions Asked!

Tags:


Forum Replies

  1. Hi Rene,

    Are those the only commands to enter the router to get SNMP v2 going? How about the client side?

    Thank you in advance.

     

    Abdi

  2. Hi Abdi,

    That's all you need to get it going yes. If you want to test this, I can highly recommend to try LibreNMS:

    http://www.librenms.org/

    Rene

  3. Hi Davis,

    That's right. Don't forget to use the snmp-server enable traps command to specify which traps you want to send.

    If you don't want to use traps, setting the community with the snmp-server community command is all you need. You can use this if you want to read the router/switch with a NMS.

    Rene

  4. Hi Rene,

    I didnt understand the line......

    "If you don’t want to use traps, setting the community with the snmp-server community command is all you need"

    If we enter "snmp-server enable traps" command then all traps will be enable, right ?

    br//
    zaman

  5. Hi Zaman,

    If you use the snmp-server enable traps command then it will enable all traps yes.

    If you don't want to use traps, you only have to set a community. Your NMS can then reach the network device and access it.

    Rene

2 more replies! Ask a question or join the discussion by visiting our Community Forum