We're Sorry, Full Content Access is for Members Only...

If you like to keep on reading, Become a Member Now! Here is Why:

  • Learn any CCNA, CCNP and CCIE R&S Topic. Explained As Simple As Possible.
  • Try for Just $1. The Best Dollar You've Ever Spent on Your Cisco Career!
  • Full Access to our 588 Lessons. More Lessons Added Every Week!
  • Content created by Rene Molenaar (CCIE #41726)

 

319 New Members signed up the last 30 days!

satisfaction-guaranteed

100% Satisfaction Guaranteed!
You may cancel your monthly membership at any time.
No Questions Asked!

Tags: ,


Forum Replies

  1. system says:

    Hi Rene !

    When you configured the area 1 nssa no-summary you have not configured the same statement in router Susan. Why not ? Its not also necessary? or i am misunderstanding and you have to configured in the ASBR only ?

    You said that we have to configured the area 1 nssa-summary in all the area. So i have that doubt.

    THANKS IN ADVANCE !!

  2. Hi Ieltxu,

    Good question. You have to configure "no-summary" only on the ABR since that's the router that will inject the default route(s) into the area. No need to do it on all routers in the (totally) NSSA area.

    Rene

  3. Rene lets say i have 3 routers on Area 1, to have a totally NSSA, i only need to configure area 1 stub nssa on 3 routers? then the abr is area 1 stub nssa no-summary?
    so in short, the ASBR must be configured "area 1 nssa" while the ABR is "area 1 nssa no-summary" to achieve the Totally NSSA?

  4. Hi John,

    That's right, within the NSSA area all routers only need "area x nssa". Only the ABR requires "area x nssa no-summary".

    Rene

  5. Hi Ajith,

    That's right, it's the ABR that will block the LSAs from entering the stub or nssa area so that's the only router where you have to add "no-summary".

    Rene

1 more reply! Ask a question or join the discussion by visiting our Community Forum