We're Sorry, Full Content Access is for Members Only...

If you like to keep on reading, Become a Member Now! Here is Why:

  • Learn any CCNA, CCNP and CCIE R&S Topic. Explained As Simple As Possible.
  • Try for Just $1. The Best Dollar You've Ever Spent on Your Cisco Career!
  • Full Access to our 637 Lessons. More Lessons Added Every Week!
  • Content created by Rene Molenaar (CCIE #41726)

 

367 New Members signed up the last 30 days!

satisfaction-guaranteed

100% Satisfaction Guaranteed!
You may cancel your monthly membership at any time.
No Questions Asked!

Tags:


Forum Replies

  1. Excellent lesson :slight_smile:

  2. Hi Rene,

    If we use distance vector routing protocol the next hop ip address will be the hub router in both of broadcast & non-broadcast network types ? that’s right ? or I’am wrong ?

  3. Hi Hussein,

    As long as the spoke routers are neighbors with the hub then the spokes will be able to learn all prefixes. The only problem is that with the broadcast and non-broadcast network types, the spoke won’t know how to reach the next hop of another spoke…that’s what you need the frame-relay maps for.

    Rene

  4. Hi Hussein,

    Routing protocols like EIGRP or RIP don’t have the broadcast and non-broadcast network types that OSPF has. By default they use multicast and if you use the neighbor command they switch to unicast traffic only, that’s it.

    The next hop will be the Hub router though, you can see see an example here:

    https://networklessons.com/eigrp/eigrp-over-frame-relay/

    Rene

  5. Good Day Rene,

    Thank You again for Brilliant explanation. Now I have a challenge to on my lab environment to configure the switch which will connect between HUB and Spoke1 and 2 as frame relay. is it possible to get clarification on that step by step with picture example if possible.

    Thank You again.

9 more replies! Ask a question or join the discussion by visiting our Community Forum